CR Magnetics CR5210-100 DC Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, +/-5 VDC Output Range

!9# CR Magnetics CR5210-100 DC Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, +/-5 VDC Output Range

Post Date : Jul 29, 2012 17:00:07
Usually ships in 24 hours

The CR5200 series, DC hall effect current transducers are designed to output a DC signal which is proportional to a DC current input signal. These devices are designed for direct current only, targeting them towards general and daily applications. Basic accuracy: 1.0 percent, calibration: True RMS Sensing, average RMS, DC, thermal drift: 500 PPM/ degree C, operating temperature: 0 degree C to +60 degree C, installation category: CAT II, Polution degree: 2, Insulation voltage: 2500 Vdc, Altitude: 2000 meter max., frequency range: DC, MTBF: greater than 100 K hours, cleaning: water-dampened cloth, supply voltage: 24 Vdc +/- 10 percent, output load: 4-20 mADC - 0 to 300 W, +/-5 Vdc - 2K W or Greater, response time: 250 ms max. 0-90 percent FS (0.25 ms for CR5410S), relative humidity: 80 percent for temperatures up to 31 degree C and decreasing linearly to 50 percent at 40 degree C. Insulation voltage: 2500 VDC. Supply current: typical 35mA, Max 40mA. Torque specs: 3.0 inch lbs. (0.4Nm).

Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

Guides Fancy Feast Gourmet Tender Liver And Chicken Feast (24/3-oz Cans)... Starstruck Disney Movie Compare Purchase Luvs Ultra Clean Baby Wipes Refill 154 Count-case Of 8...